|
• Scanner probes are eddy current probes used in combination with an automated rotator, which is attached to an eddy current iinstrument. High speed testing of bolt holes, counter bores, the hole perimeter or around fasteners heads are a typical application for these types of probes. Several designs and materials are possible depending on the application the probes are used in. There are many different designs available for all rotating guns on the market.
• There are many different kinds of connectors that will work with your choosen rotating scanner probe. Some of our most popular connectors are the Nortec 1000 & 2000 (16-pin Lemo) and the 4-pin Fischer. Other connectors available are the Microdot, 2-pin Microdot, Locator 2 ( 7 Pin Lemo), Phasex 1.1 -(6 Pin Jaeger), MIZ-21 (4 Pin Fischer), Triax, Coax, Phasec 2d & 2200 (12 Pin Lemo), Rohmann B1 (8 Pin Fischer), Nortec NDT-18 & 19 (8 Pin Burndy), and MIZ-20 & 22 (4Pin Cannon.) |
|
 |
• Bolt hole probes are used to scan the inside of a bore for cracks. Many different designs and coil types are available to meet your inspection requirements.
|
