ultrasound couplant from Sonotech

 

 

 

 

 

 

Please Select

Please Select

Please Select

Please Select

 
 

Ambient Temp

High Temp

Water Treatment

Specialty

UT-X Powder

 
 

Download price sheet

 
 

Ambient Temperature Couplants


Click here for Pricing and Purchase


 Ultrasonic Couplants and Testing Specifications
 

Please Select

Ambient temperature UT couplants can be selected on the basis of performance, environmental impact, temperature range and cost.

ULTRAGEL II, SONOTRACE, and ECHOGEL are water-based couplants featuring high surface wetting capability to maintain the best possible contact on dirty or oily surfaces. Ferrous corrosion inhibition factors for each are the highest in their performance class. ULTRAGEL II, SONOTRACE, and ECHOGEL meet nuclear specifications for Halogens, Sulfur and low melting point metals, have been in use for over twenty-five years and have established the standard by which other UT couplants are judged.

SONOGLIDE, SOUNDSAFE, SOUNDCLEAR, UT-30, and UT-X are environmentally benign couplants that have low skin irritation potential because they do not contain harsh surfactants, dyes or fragrances and meet nuclear power specifications for Halogens, Sulfur and low melting point metals. These couplants contain an environmentally benign ferrous corrosion inhibition system for steel. When ferrous corrosion is the most important criteria, Ultragel II, Sonotrace or Echogel provide superior corrosion inhibition.

VISCOSITY: Viscosity, or thickness, of couplants is noted by a grade (GR) following the name of the couplant. The lower the number, the lower the viscosity.

PRODUCT SAMPLES ARE AVAILABLE.

 top

 
 

High Temperature Couplants


Click here for Pricing and Purchase
 


 Ultrasonic Couplants and Testing Specifications
 

Sonotech manufactures a wide variety of couplants for flaw detection, thickness gaging, flow metering, and acoustic emission testing at extreme temperatures. Some of the products in this category have proven themselves for over 25 years. We have listed below the primary features of each of our High Temperature Couplants.

NO PERFLUOROCARBONS -- When overheated, perfluorocarbons (such as PTFE) release gases that cause "polymer plume fever", a flu-like illness that can last for 24 hours or more. Sonotech couplants do not contain perfluorocarbons.

VISCOSITY: Viscosity, or thickness, of couplants is noted by a grade (GR) following the name of the couplant. The lower the number, the lower the viscosity.

View the
High Temperature Comparison Chart or Couplant Temperature Chart in Adobe Acrobat PDF Format.

PRODUCT SAMPLES ARE AVAILABLE.

 top

 
 
UT Water Treatment Series

 

 


 Ultrasonic Couplants and Testing Specifications
 

Please Select

Sonotech offers a line of UT water additives formulated to enhance the properties of water as an ultrasonic coupling medium. These products are designed to make water coupled UT testing techniques (such as immersion tanks, bubblers, and squirters) faster, easier, and more reliable.

PRODUCT SAMPLES ARE AVAILABLE.

 top

 
 

Specialty Couplants


Click here for Pricing and Purchase


 Ultrasonic Couplants and Testing Specifications
 

Please Select

Sonotech Specialty UT Couplants have unique properties for unusual or difficult inspections.

Gel 3000 Contains fluorescent tracer to assure complete application and removal.

High Z High acoustic impedance couplant for use on curved, rough, pitted or heavily corroded surfaces.

Humex Humectant and glycerine-free couplant developed for nuclear reactor testing.

Shear Gel For use in normal incidence shear wave applications.

Thermasonic Use where rapid wetting and slow drying are required.

VISCOSITY: Viscosity, or thickness, of couplants is noted by a grade (GR) following the name of the couplant. The lower the number, the lower the viscosity.

PRODUCT SAMPLES ARE AVAILABLE.

 top

 
 
UT-X Powder

 

 


 Ultrasonic Couplants and Testing Specifications
 

Please Select
UT-X POWDER and UT-X/FE POWDER are cost effective concentrates that are mixed with water at the inspection site. The compact and lightweight packets are easy to transport to distant sites or store for unanticipated shortages as emergency couplant.

UT-X POWDER and UT-X/FE POWDER are available in pre-measured 1-gallon and 5-gallon packets. UT-X POWDER can be custom mixed to the viscosity required by the test procedure. UT-X POWDER incorporates a mild corrosion inhibitor, a preservative, a viscosity building polymer and ease of mixing in a pre-measured packet.

PRODUCT SAMPLES ARE AVAILABLE.

For MSDS and product data sheets go here.

 
  top

 

 

 

 

 

 

NDT Solutions, Inc. (NDTS)
150 W. First St.
NDTS Suite
New Richmond, WI 54017 
Email
Phone: (715) 246-0433

Fax: (715) 246-0466